Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

enable password change through LMS 3.0.1

Hi,

I want to change enable secret on all the switches,if i changed with a net config will the LMS be able to complete the job and if does then will be able communicate with the devices for next or i have to go common services>Device and Credential Admin>Editing Device Credentials,and i have to change manually enable secret for all the switches.

Also i want to remove the secondary credentials from all the devices in common services(DCR)how can i do it?

I have installed

Common Services 3.1.1

Resource Manager Essentials 4.1.1

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: enable password change through LMS 3.0.1

Yes, if you use the Enable Password template, the enable secret value will be automatically updated in DCR as that device's enable password. You will not have to do any manual DCR update.

Go to Common Services > Device and Credentials > Device Management, and select all the devices, then click Edit Credentials. Clear the fields you do not want to be populated, then click Finish when done.

1 REPLY
Cisco Employee

Re: enable password change through LMS 3.0.1

Yes, if you use the Enable Password template, the enable secret value will be automatically updated in DCR as that device's enable password. You will not have to do any manual DCR update.

Go to Common Services > Device and Credentials > Device Management, and select all the devices, then click Edit Credentials. Clear the fields you do not want to be populated, then click Finish when done.

148
Views
0
Helpful
1
Replies