Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enable snmp traps on Nexus1000V

Hello community,

I have the following issue. I want to configure snmp-traps regarding stpx (root-inconsistency, loop-inconsistency) on a Cisco Nexus 1000V.

The command "show snmp traps" lists stpx as a trap that could be configured and which is not at the moment.

MKBE1NX1# sh snmp trap


Trap type                                           Enabled


entity               : entity_mib_change               Yes         

entity               : entity_module_status_change     Yes         

entity               : entity_power_status_change      Yes         

entity               : entity_module_inserted          Yes         

entity               : entity_module_removed           Yes         

entity               : entity_unrecognised_module      Yes         

entity               : entity_fan_status_change        Yes         

entity               : entity_power_out_change         Yes         

link                 : linkDown                        Yes         

link                 : linkUp                          Yes         

link                 : extended-linkDown               Yes         

link                 : extended-linkUp                 Yes         

link                 : cieLinkDown                     No          

link                 : cieLinkUp                       No          

link                 : connUnitPortStatusChange        Yes         

rf                   : redundancy_framework            Yes         

aaa                  : server-state-change             No          

license              : notify-license-expiry           Yes         

license              : notify-no-license-for-feature   Yes         

license              : notify-licensefile-missing      Yes         

license              : notify-license-expiry-warning   Yes         

zone                 : unsupp-mem                      No          

upgrade              : UpgradeOpNotifyOnCompletion     No          

upgrade              : UpgradeJobStatusNotify          No          

feature-control      : FeatureOpStatusChange           No          

rmon                 : risingAlarm                     No          

rmon                 : fallingAlarm                    No          

rmon                 : hcRisingAlarm                   No          

rmon                 : hcFallingAlarm                  No          

config               : ccmCLIRunningConfigChanged      No          

snmp                 : authentication                  No          

bridge               : topologychange                  No          

bridge               : newroot                         No          

stp                  : inconsistency                   No          

stpx                 : loop-inconsistency              No          

stpx                 : root-inconsistency              No   

The only snmp traps that can be configured on the system are:

aaa              Module notifications enable

  config           Module notifications enable

  entity           Module notifications enable

  feature-control  Module notifications enable

  license          Module notifications enable

  link             Module notifications enable

  rf               Module notifications enable

  rmon             Module notifications enable

  snmp             Module notifications enable

  upgrade          Module notifications enable

  zone             Module notifications enable

Nothing about stpx... Is there some other way to configure more traps?

Thanks in advance,



Accepted Solutions
Cisco Employee

Enable snmp traps on Nexus1000V

Looks like you could be hitting CSCsz96130 "show snmp trap displays five unconfigurable types bridge / stpx" and it looks like support has been added starting 5.0(2)N1(1).

Cisco Employee

Enable snmp traps on Nexus1000V

Looks like you could be hitting CSCsz96130 "show snmp trap displays five unconfigurable types bridge / stpx" and it looks like support has been added starting 5.0(2)N1(1).

New Member

Enable snmp traps on Nexus1000V


thank you for your answer!

CreatePlease login to create content