Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

end user report vlan data not correct

LMS 3.1 / CM 5.1.3

We have a lot of Alcatel phones on wich a PC is connected. So there is a Data Vlan (234) and a Voice Vlan (853). In end user report all connections are shown in the data vlan.

Anyway, The vlan port assignment data (operational tasks) shows the vlans ok : vlan 234 Native and vlan 853 Auxiliary

Is this a problem with end user reports ?

Many thanks,

Lieven Stubbe

Belgian Railways

1 REPLY
Cisco Employee

Re: end user report vlan data not correct

UT reads the CAM/MAC tables from the switches to determine which VLAN a given end host is in (considering Alcatel phones as end hosts here). Verify that the phones should up in the correct VLAN on the switches.

127
Views
0
Helpful
1
Replies
CreatePlease to create content