Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Energywise on switch

We are looking at the energywise commands on our switches to power off some ports over night. We have successfully powered off some ports, however if we want to make changes to say the times then it seems that we have to edit each port individually. Is there a way that you can configure say a group that ports belong to for energywise and link to a single time range?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Energywise on switch

Hi,

Please follow these threads;

Https://supportforums.cisco.com/thread/164684

Https://supportforums.cisco.com/thread/2104246

Hope it helps

Regards
Don't forget to rate helpful posts

Sent from Cisco Technical Support iPhone App

3 REPLIES
VIP Purple

Re: Energywise on switch

Hi,

Please follow these threads;

Https://supportforums.cisco.com/thread/164684

Https://supportforums.cisco.com/thread/2104246

Hope it helps

Regards
Don't forget to rate helpful posts

Sent from Cisco Technical Support iPhone App

New Member

Energywise on switch

VIP Purple

Re: Energywise on switch

Glad that you found your solution.

Regards

Sent from Cisco Technical Support iPhone App

242
Views
0
Helpful
3
Replies
CreatePlease to create content