Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EOL/EOS notification within Cisco's MIBS

Hi,

I'm very intersted about getting EOL/EOS and part number information from MIB OID's.

The required info is:

1) Whether the device is in EOL/EOS status.

2) Is there any notice in any OID in every Cisco device regarding part number (for example WS-C4510R for Catalyst 4500 with 7 slots)?

3) Is ther any notice in any OID in Cisco's devices for replacment parts (part that come instead EOL part).

Thanks in advaced.

3 REPLIES
Cisco Employee

Re: EOL/EOS notification within Cisco's MIBS

These details are not available from SNMP alone. CiscoWorks Resource Manager Essentials now has the ability to provide EOS/EOL information because it feeds into the product database on Cisco.com, and feeds in the serial numbers of chassis and modules. You would need to extract the same serial numbers from your devices (this is done differently depending on device and software version), then go to Cisco.com, and search through the product bulletins for EOS/EOL announcements.

New Member

Re: EOL/EOS notification within Cisco's MIBS

Joe...I assume this ability for RME is available via LMS 3.x and not LMS 2.6. If not LMS 2.6, any chance of retrofit ?

Thanks

Cisco Employee

Re: EOL/EOS notification within Cisco's MIBS

Correct, EOL/EOS reports are part of RME 4.1 which os part of LMS 3.0. There will be no back port to LMS 2.6.

298
Views
0
Helpful
3
Replies