Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

erase config on CSS 11000

We are trading in some old equipment. I need to wipe the config off two CSS 11000. I cannot find the command to do this. There does not appear to be a "write mem erase" or "delete" or "no write" or anything. Please advise.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: erase config on CSS 11000

Christopher,

Clear startup-config is the command you want to use. You can also possibly run the startup script and it will reinitialize the configuration, script play setup.

http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_administration_guide_chapter09186a0080176bcd.html#wp1153225

Lastly if you are reselling then you might want to make sure the Offline DM password isn't set or is set to something simple like cisco.

http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_administration_guide_chapter09186a0080176bd3.html

Please rate any helpful posts

Thanks

Fred

1 REPLY

Re: erase config on CSS 11000

Christopher,

Clear startup-config is the command you want to use. You can also possibly run the startup script and it will reinitialize the configuration, script play setup.

http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_administration_guide_chapter09186a0080176bcd.html#wp1153225

Lastly if you are reselling then you might want to make sure the Offline DM password isn't set or is set to something simple like cisco.

http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_administration_guide_chapter09186a0080176bd3.html

Please rate any helpful posts

Thanks

Fred

225
Views
0
Helpful
1
Replies
CreatePlease to create content