Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error Message in config Archive in RME

I got the below error message in config Archive in RME "CM0056 Config fetch failed for 172.18.0.23 Cause: CM0204 Could not create DeviceContext for 231 Cause: CM0206 Could not get the config transport implementation for Cause: CM0202 Could not access 172.18.0.23 via SNMP. Action: Check the Read Community string Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed. "

3 REPLIES
Cisco Employee

Re: Error Message in config Archive in RME

It looks like RME does not have a package to support this device. What type of device is it? What is its sysObjectID?

New Member

Re: Error Message in config Archive in RME

Switch type is WS-C3560V2-48PS nad sysObject ID is .1.3.6.1.4.1.9.1.1025

Cisco Employee

Re: Error Message in config Archive in RME

As I said in the other thread, you will need to download and install the updated RME device packages in order to support this device.

165
Views
0
Helpful
3
Replies