Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Excessive Fragmentation alerts after upgrade to LMS 3.2

Has anyone else experienced this issue? We upgraded to LMS 3.2 (windows server 2003) and the following morning around the time the devices are polled, about half of our CatOS 6509s got these excessive fragmentation DFM alerts. Nothing has changed on the switches. Please let me know if you have run into this and what you did to fix it. We are receiving thousands of alerts per day.

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Excessive Fragmentation alerts after upgrade to LMS 3.2

This is a known issue, and the workaround is to set the threshold to 0 for switches as this event (Memory Fragmentation) has no meaning for switches. This is done under DFM > Configuration > Polling and Thresholds > Managing Thresholds.

2 REPLIES
Cisco Employee

Re: Excessive Fragmentation alerts after upgrade to LMS 3.2

This is a known issue, and the workaround is to set the threshold to 0 for switches as this event (Memory Fragmentation) has no meaning for switches. This is done under DFM > Configuration > Polling and Thresholds > Managing Thresholds.

New Member

Re: Excessive Fragmentation alerts after upgrade to LMS 3.2

Thank you, this has put an end to the alerts!

412
Views
0
Helpful
2
Replies