FDM Email Notification Problem

[mohamed-elsherif]

Hello every one

i have configured my cisco LMS Email Notification Group and evrything works fine sending and receving ,  excpet that the FDM sent the Email without displaying the Device Name only the IP address in the Object ID .

[AFROJ AHMAD]

Hi Mohamed,

By deafult DFM does not use the DCR Display Name. check the below link:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/3.2/user/guide/useDevMg.html#wp1367517

To overcome this :

1> Added the Device Name and IP address on the DNS Server

2> Modified NMSROOT/objects/smarts/conf/discovery/discovery.conf, and changed the DisplayNameFormat from "AUTOASSIGNED" to "MIBIISYSNAME". 

That caused DFM to display the sysName as the display name.

Also set the NameFormat to TM_USEAUTONAME, then restarted daemon Manager (net stop crmdmgtd && net start crmdmgtd )

Open name-resolver.conf file and make same changes that we have made in  discovery.conf.  ie, the following entry should be there in this file  also.

  #NameFormat = "TM_USESEEDNAME"

  NameFormat = "TM_USEAUTONAME"

3> Delete and re-add a device in DFM

Thanks-

Afroz

[Do rate the useful post]