Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Find OID of QoS service policy counters

We would like to graph some counters from a service policy that is applied to an interface.

 

How do i find the correct OID to read with my snmp tooling?  See below red variables.

I found that it should be somewhere below the .1.3.6.1.4.1.9.9.166.1. tree.  But that's as far as i come.  Any help would be appreciated!

 

ROUTER#sh snmp mib ifmib ifindex gi0/1.1052
Interface = GigabitEthernet0/1.1052, Ifindex = 13


ROUTER#sh policy-map int gi0/1.1052       
 GigabitEthernet0/1.1052

  Service-policy input: POLICE-20M

    Class-map: class-default (match-any)
      1092089687 packets, 439313844377 bytes
      5 minute offered rate 62000 bps, drop rate 0 bps
      Match: any
      police:
          cir 20000000 bps, bc 625000 bytes
        conformed 1092089687 packets, 439313844377 bytes; actions:
          transmit
        exceeded 0 packets, 0 bytes; actions:
          drop
        conformed 49000 bps, exceed 0 bps

  Service-policy output: ISP-20M

    Class-map: class-default (match-any)
      1374823635 packets, 1118638745033 bytes
      5 minute offered rate 184000 bps, drop rate 0 bps
      Match: any
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/11899479/0
      (pkts output/bytes output) 1362887381/1104226601030
      shape (average) cir 20000000, bc 80000, be 80000
      target shape rate 20000000
ROUTER#

 

===============================================================

Reply to Afroz:

(for some reason i don't get a text windows when i try to reply in the discussion, so instead i edit my own post)

 

Thanks for your reply!  I'll try to work my way through this procedure!

 

btw a coworker suggested i could simply use the drops counter on the interface (in this case).

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi ,check the attached

Hi ,

check the attached document... step by step procedure is given :)

 

Thanks-

Afroz

***Ratings Encourages Contributors ****
 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
1 REPLY
Cisco Employee

Hi ,check the attached

Hi ,

check the attached document... step by step procedure is given :)

 

Thanks-

Afroz

***Ratings Encourages Contributors ****
 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
631
Views
0
Helpful
1
Replies
CreatePlease login to create content