We have been seeing some reports of this recently. The workaround is always to download the image manually, then import it into the SWIM repository.
Do you use a proxy server? Have you signed the crypto agreement on Cisco.com? Does your Cisco.com ID contain a capital letter? These are the things that can cause MD5 failures. If you have not signed the crypto agreement, once you download a crypto image manually, you will then be able to do it from within SWIM.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...