Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to add devices in LMS3.2?

Hello,

This is my first time to install LMS3.2. I successfully installed the software but I don't know what is the next procedure and I don't know how to add devices. Please, How can I add devices to the LMS.

thank you,

  • Network Management
5 REPLIES
Hall of Fame Super Gold

Re: How to add devices in LMS3.2?

Go to Function > under Common Services > Device and Credentials > Device Management.

You can enter devices one-by-one or do bulk transfer (CSV file or text file).

New Member

Re: How to add devices in LMS3.2?

Hello,

Is there any configuration needed to the router/switches like snmp?

thank you

Hall of Fame Super Gold

Re: How to add devices in LMS3.2?

Make sure your SNMP community string are all the same.  Also, if you have the default "public" and "private", for security sake, please change it.

New Member

Re: How to add devices in LMS3.2?

Hai,

You need to assign SNMP comunity string on routers and swiches which your going to addd in LMS 3.2.

Be care with Read only and read write community string .

Read only to only fetch config, view device details.

Read write to change configuration on router through LMS.

regards,

M.K

New Member

Re: How to add devices in LMS3.2?

Hello,

Do I need to configure the username, password and protocols to discover the devices?

thank you

254
Views
0
Helpful
5
Replies