Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to ASR 9k auto backup to external FTP server

How to take auto  running configuration backup when use commit command in asr9k  .Our asr9k sofware Version 4.0.1[Default] .I usse the commands

ftp client password encrypted 050D121F345F4B1B4

ftp client username cisco

ftp client source-interface GigabitEthernet0/0/0/14

ftp client anonymous-password cisco

(Password information changed)

configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf

But auto backup not happening .following errror showing after every COMMIT command.

( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.

Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )

Manually I able to take Running-configuration backup through ftp int same lacation (

ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .Please help .

1 REPLY
Silver

Re: How to ASR 9k auto backup to external FTP server

I have not personally seen this issue before but you may find verifying your config helpful.

SUMMARY STEPS

1. configure

2. show running-config

3. describe hostname hostname

4. end

5. show sysdb trace verification shared-plane | include path

6. show sysdb trace verification location node-id

7. show cfgmgr trace  

8. show configuration history commit

9. show configuration commit changes {last | since | commit-id}

10. show config failed startup

11. cfs check --> Verifies the Configuration File System (CFS)

However I did notice the following:

Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.  Notice the preceeding '/'?

Thanks

990
Views
0
Helpful
1
Replies
CreatePlease to create content