How to ASR 9k auto backup to external FTP server

[Santanu Podder]

How to take auto  running configuration backup when use commit command in asr9k  .Our asr9k sofware Version 4.0.1[Default] .I usse the commands

ftp client password encrypted 050D121F345F4B1B4

ftp client username cisco

ftp client source-interface GigabitEthernet0/0/0/14

ftp client anonymous-password cisco

(Password information changed)

configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf

But auto backup not happening .following errror showing after every COMMIT command.

( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.

Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )

Manually I able to take Running-configuration backup through ftp int same lacation (

ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .Please help .

[ngoldwat]

I have not personally seen this issue before but you may find verifying your config helpful.

SUMMARY STEPS

1. configure

2. show running-config

3. describe hostname hostname

4. end

5. show sysdb trace verification shared-plane | include path

6. show sysdb trace verification location node-id

7. show cfgmgr trace  

8. show configuration history commit

9. show configuration commit changes {last | since | commit-id}

10. show config failed startup

11. cfs check --> Verifies the Configuration File System (CFS)

However I did notice the following:

Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.  Notice the preceeding '/'?

Thanks