Generally you acn NOT calculate traffic in a network, as most of the traffic is created by user action and the users can not be calculated ...
You can maybe give estimations based on experience, but as applications are changing experience is somewhat difficult to apply.
In case it is about management traffic you are interested in: There is regular traffic like polling which can be calculated rather precisely. But then there is traffic created by unforseen events like an SNMP trap sent because of interface down. This can also just be estimated roughly based on experience.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...