Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to change LMS 4.0.1 from server under Windows 2003 to new server under Windows 2008 R2

Hello,

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.

Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.

I'm wondering what could be the best procedure to do that migration.

Can I used backup / restore procedure in that case ?

If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

Help would be appreciated.

Thanks,

Patrice

2 REPLIES
Hall of Fame Super Silver

How to change LMS 4.0.1 from server under Windows 2003 to new se

A 4.0.1 backup can be restored on the new server - even if it is running 4.1 or 4.2. I don't believe the backup will carry over anything specific to the old server's IP address. I'd recommend that you keep the same hostname (DNS-wise) - especially for things like the server's SSL certificate - although that too won't be part of the application backup so you can give the new server a new name if the customer is strongly set on that.

Note that you may change to soft appliance platform at this point. If the customer has a VMWare environment available, I'd strongly suggest considering this option. the soft appliance is a breeze to install and setup.

In either case, please refer to the installation guide for details.

New Member

How to change LMS 4.0.1 from server under Windows 2003 to new se

Thanks Marvin for replying.

Customer wants to set new server with new name and new IP adddress and he doesn't have VMware environment.

Can I restore a backup made on a 32 Bits server on a 64 bits server (which is mandatory I think to install LMS on a Windows 2008 R2) ?

358
Views
2
Helpful
2
Replies
CreatePlease login to create content