Hello. We have a 3750 which has a few vlans configured. One Vlan is for public access wifi and another for our security system (door access, cameras, etc.). I don't want the public wifi vlan to access the security system vlan. How can I accomplish this in the 3750?
We have a ASA 5520 also connected to the 3750. I probably want to forward the traffic from the public wifi vlan to the ASA where I can farther create rules. How can I accomplish this on the 3750? Again, thanks.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...