Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to disable snmp trap:snmp trap cefcPowerStatusChange

on our C6500 (IOS) switches, each time an IP phone connected or disconnected will result to a trap like this:

Message:

snmp trap cefcPowerStatusChange

Event details:

cefcFRUPowerAdminStatus = 3

cefcFRUPowerAdminStatus.3019 = 3

cefcFRUPowerOperStatus = 2

cefcFRUPowerOperStatus.3019 = 2

entPhysicalDescr = 10/100/1000BaseT

entPhysicalDescr.3019 = 10/100/1000BaseT

entPhysicalName = Gi2/8

entPhysicalName.3019 = Gi2/8

monitor = localhost

oid = 1.3.6.1.2.1.47.1.1.1.1.7.3019

in the config, we have:

snmp-server enable traps snmp linkdown linkup coldstart warmstart

snmp-server enable traps chassis

snmp-server enable traps module

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps fru-ctrl

snmp-server enable traps entity

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps flash insertion removal

snmp-server enable traps c6kxbar intbus-crcexcd intbus-crcrcvrd

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps vlan-mac-limit

IS there anyway to disable trap for "power status change"?

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

Ah rats, I stand corrected.

13 REPLIES
Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

Since it's from CISCO-ENTITY-FRU-CONTROL-MIB, it can probably be disabled by "no snmp-server enable traps fru-ctrl"

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

thanks but in the alert

oid = 1.3.6.1.2.1.47.1.1.1.1.7.3019

is not listed at:

http://www.oidview.com/mibs/9/CISCO-ENTITY-FRU-CONTROL-MIB.html

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

3019 is a dynmaically generated index number identifying the unique object.

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

thanks a lot!

for CATOS, which command can disable this trap?

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

The config you posted above is from IOS.

For CatOS: "clear snmp trap enable entityfru"

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

here is output from CatOS C6500

Traps Enabled: autoshutdown,callhomesmtp,chassis,entity,envfan,envpower,

envshutdown,envstate,envtemp,flashinsert,flashremove,inconsistency,l2tunnel,

linkerrhigh,linkerrlow,loopinconsistency,macmove,macnotification,macthreshold,

module,newroot,port,redundancy,rootinconsistency,sysinfolog,system,topochange,

vlancreate,vlandelete,vmps,vtp

Port Traps Enabled: 5/1-9,6/1-9

Module inlinepower traps enabled: 1-4,8

I don't see entityfru, just "entity"

do I need to clear anything?

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

What's the "show version" on it?

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

WS-C6509-E Software, Version NmpSW: 8.4(2a)

Copyright (c) 1995-2005 by Cisco Systems

NMP S/W compiled on Mar 29 2005, 17:20:54

System Bootstrap Version: 12.2

System Boot Image File is 'bootdisk:cat6000-sup32pfc3k9.8-4-2a.bin'

thank!

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

Apparently I missed the fact 1.3.6.1.2.1.47.1.1.1.1.7.#### is an ENTITY-MIB trap, in which case you would want to "clear snmp trap entity" to stop it.

Erratum to one of the earlier posts: It should've been "clear snmp trap entityfru"--no "enable" when "clear".

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

thanks but I don't see this command "clear snmp trap entityfru" is available in CatOS

CATos-SW1> (enable) clear snmp trap ?

all Clear all SNMP trap receivers

IP address or hostname

index Clears only specified SNMP trap receiver

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

Note it's "entity" in my first paragraph: You want to use "clear snmp trap entity" to stop the 1.3.6.1.2.1.47.1.1.1.1.7 traps on your CatOS.

New Member

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

ok. bloody CatOS

it is "set snmp trap disable entity"

Blue

Re: how to disable snmp trap:snmp trap cefcPowerStatusChange

Ah rats, I stand corrected.

1005
Views
5
Helpful
13
Replies
CreatePlease login to create content