Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to enable automatic startup on LMS 4.1 ?

Hello all,

i wanna ask a question regarding automatic startup on lms 4.1, i have installed my LMS 4.1 on esxi  4.x . but recently my server sometimes down because the electricity problem. and when my friend push the power button to start the server, the LMS is not automatically active. is it possible to make it automatically active soon after my server power up ?

thanks before. 

1 ACCEPTED SOLUTION

Accepted Solutions

how to enable automatic startup on LMS 4.1 ?

I think this explains it

http://blog.michaelnugent.ca/2009/05/esxi-autostart.html

"You need to select the ESXi server, go into configuration and then go  into VM Startup/Shutdown.  Then you need to use the 'up' and 'down'  buttons to move between categories."

Cheers,

Michel

3 REPLIES
Blue

Re: how to enable automatic startup on LMS 4.1 ?

LMS should start up automatically by default, unless you had deliberately disabled the auto-startup, which doesn't sound like the case. Given the power issues, it's possible LMS has failed to start up automatically due to database corruption, so you might want to examine the pertinent LMS logs for indication of any process failures, such as in

/var/adm/CSCOpx/log/daemons.log (on Solaris and the LMS appliance) or NMSROOT\log\syslog.log (on Windows) files.

Below are some reference docs:

LMS Processes Down - What to do

https://supportforums.cisco.com/docs/DOC-14520

LMS Daemon Cheat Sheets up to LMS 4.0

https://supportforums.cisco.com/docs/DOC-8798

LMS Database Troubleshooting

https://supportforums.cisco.com/docs/DOC-8796

how to enable automatic startup on LMS 4.1 ?

I think this explains it

http://blog.michaelnugent.ca/2009/05/esxi-autostart.html

"You need to select the ESXi server, go into configuration and then go  into VM Startup/Shutdown.  Then you need to use the 'up' and 'down'  buttons to move between categories."

Cheers,

Michel

New Member

how to enable automatic startup on LMS 4.1 ?

thanks all.

366
Views
0
Helpful
3
Replies
CreatePlease login to create content