Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to generate logs for packet loss using ip sla or track command

how to generate logs for packet loss using ip sla or track command

3 REPLIES
New Member

how to generate logs for packet loss using ip sla or track comma

Hi Parag,

You could use the reaction configuration feature to generate the syslogs whenever there is a packet loss.

Following is a sample config

ip sla reaction-configuration 1 react packetLossDS action-type trapOnly threshold-type immediate threshold-value 30

ip sla reaction-configuration 1 react packetLossSD action-type trapOnly threshold-type immediate threshold-value 30

make sure you have the rtr traps enabled on the device. Whenever the device is violating the threshold of 30 packetlosses between the SD and DS there would be a trap generated for the same to your NMS.

Regards,

Syed Khalid

New Member

how to generate logs for packet loss using ip sla or track comma

thanks syed.  it worked

New Member

how to generate logs for packet loss using ip sla or track comma

Hey Parag,

Good to know. Please rate the post since it has been helpful to resolve your concern.

Regards,

Syed Khalid

434
Views
0
Helpful
3
Replies