Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to know the SERIAL NO. of a device from "SHOW VERSION"??

Hi guys, just wondering how to know the SERIAL NO. of a device from "SHOW VERSION". Below is "SHOW VERSION" of my device.Thanks

GSK_IPOH#sh version

Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.3(11)T5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Sat 02-Apr-05 18:29 by yiyan

ROM: System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)

GSK_IPOH uptime is 14 minutes

System returned to ROM by power-on

System image file is "flash:c1700-k9o3sy7-mz.123-11.T5.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1712 (MPC862P) processor (revision 0x101) with 86584K/11720K bytes of memory.

Processor board ID FOC09293SFJ (3456278939), with hardware revision 0000

MPC862P processor: part number 7, mask 0

1 Ethernet interface

5 FastEthernet interfaces

1 ISDN Basic Rate interface

1 Virtual Private Network (VPN) Module

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

GSK_IPOH#

GSK_IPOH#

  • Network Management
6 REPLIES

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

Hi

Its not possible to check out the serial nos of the equipments as you are trying with 1700box.

But the same is possible with 3750 and 2950 which i have seen but it doesnt give the serial no when u issue in routers.

better to go out there and physically verify the same..

for verification purpose as i have read earlier you can bind it on snmp cli (as chasis id) so that u can verify the next time using the same.

regds

New Member

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

In this output it should be the Processor Board ID FOC09293SFJ.

Hall of Fame Super Silver

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

William

There is not anything in the show version command that will tell you the serial number of the router. Since you are running 12.3(11)T5 on a 1700 router it should support the show inventory command. the show inventory command does show the serial number of the router.

HTH

Rick

New Member

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

Thanks for reply RICK, btw which is my device s/n ? because ther are many s/n ..

GSK_IPOH#

GSK_IPOH#show inventory

NAME: "1712 chassis", DESCR: "1712 chassis, Hw Serial#: 3456278939, Hw Revision: 0x101"

PID: 1712 , VID: 0x101, SN: FOC09293SFJ (3456278939)

NAME: "Chassis Slot", DESCR: "1700 Chassis Slot"

PID: 1700 Chassis Slot , VID: , SN:

NAME: "C1712 1FE 4ESW Mainboard Port Adopter", DESCR: "C1712 1FE 4ESW Mainboard Port Adopter"

PID: C1712 1FE 4ESW Mainboard Port Adopter, VID: 0x101, SN: FOC09293SFJ (3456278939)

NAME: "Daughter card slot:0", DESCR: "1700 DaughterCard Slot"

PID: 1700 DaughterCard Slot, VID: , SN:

NAME: "WIC/VIC 0", DESCR: "WAN Interface Card - 4 Port FE Switch"

PID: WAN Interface Card - 4 Port FE Switch, VID: 1.0, SN: 502852363

NAME: "Ethernet0", DESCR: "PQUICC Ethernet"

PID: PQUICC Ethernet , VID: , SN:

NAME: "FastEthernet1", DESCR: "Fast Ethernet"

PID: Fast Ethernet , VID: , SN:

NAME: "FastEthernet2", DESCR: "Fast Ethernet"

PID: Fast Ethernet , VID: , SN:

NAME: "FastEthernet3", DESCR: "Fast Ethernet"

PID: Fast Ethernet , VID: , SN:

NAME: "FastEthernet4", DESCR: "Fast Ethernet"

PID: Fast Ethernet , VID: , SN:

NAME: "Daughter card slot:1", DESCR: "1700 DaughterCard Slot"

PID: 1700 DaughterCard Slot, VID: , SN:

NAME: "WIC/VIC 1", DESCR: "Wan Interface Card BRI S/T (2186)"

PID: Wan Interface Card BRI S/T (2186), VID: 1.3, SN: 33757928

NAME: "BRI0", DESCR: "PQUICC BRI"

PID: PQUICC BRI , VID: , SN:

NAME: "1700 Expansion Slot", DESCR: "1700 Expansion Slot"

PID: 1700 Expansion Slot, VID: , SN:

NAME: "C1700_EM", DESCR: "Virtual Private Network (VPN) Module"

PID: Virtual Private Network (VPN) Module, VID: , SN: 3832221415

NAME: "FastEthernet0", DESCR: "PQUICC_FEC"

PID: PQUICC_FEC , VID: , SN:

Hall of Fame Super Silver

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

William

Yes there are multiple serial numbers displayed. In my experience the first one for chassis (NAME: "1712 chassis") will match the serial number on the label on the router. So I believe that your router serial number is SN: FOC09293SFJ (3456278939).

HTH

Rick

New Member

Re: How to know the SERIAL NO. of a device from "SHOW VERSION"??

Thanks RICK ! finally i got the answer . Thanks you vry much :-)

560
Views
0
Helpful
6
Replies
This widget could not be displayed.