Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to reload / reset IOS device via snmp

I only found an info about CatOS devices:

http://www.cisco.com/en/US/customer/tech/tk648/tk362/technologies_q_and_a_item09186a00800b69af.shtml

anyone has an idea how the reset an IOS device with snmpset

thx

8 REPLIES
New Member

Re: How to reload / reset IOS device via snmp

New Member

Re: How to reload / reset IOS device via snmp

it does not work wirth 3750 and IOS 12.2(25)SE.

I also found an info about the sysReset object at:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=sysReset

but the mib of 3750 and IOS 12.2(25)SE does not include the sysReset Object.

oper@ffm002nvz:/lanbf/home/oper/sthon/bin>snmpwalk -c read router .1.3.6.1.4.1.9.5.1.1

cisco.workgroup.ciscoStackMIB.systemGrp.sysTraffic.0 : INTEGER: 0

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficPeak.0 : INTEGER: 0

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficPeakTime.0 : Timeticks: (146335508) 16 days, 22:29:15.08

cisco.workgroup.ciscoStackMIB.systemGrp.sysEnableChassisTraps.0 : INTEGER: disabled

cisco.workgroup.ciscoStackMIB.systemGrp.sysEnableModuleTraps.0 : INTEGER: disabled

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficMeterTable.sysTrafficMeterEntry.sysTrafficMeterType.1 : INTEGER: systemSwitchingBus

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficMeterTable.sysTrafficMeterEntry.sysTrafficMeter.1 : INTEGER: 0

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficMeterTable.sysTrafficMeterEntry.sysTrafficMeterPeak.1 : INTEGER: 0

cisco.workgroup.ciscoStackMIB.systemGrp.sysTrafficMeterTable.sysTrafficMeterEntry.sysTrafficMeterPeakTime.1 : Timeticks: (146335508) 16 days, 22:29:15.08

cisco.workgroup.ciscoStackMIB.systemGrp.sysStandbyPortEnable.0 : INTEGER: enabled

cisco.workgroup.ciscoStackMIB.systemGrp.67.0 : INTEGER: 2

very strange

New Member

Re: How to reload / reset IOS device via snmp

Have you got the latest CISCO-STACK-MIB installed?

New Member

Re: How to reload / reset IOS device via snmp

I ever thought that the mib is implemented in the IOS.

Do I have to install it manually on the switch ???

New Member

Re: How to reload / reset IOS device via snmp

Sorry I meant on the latform that you are running snmpwalk on.

Red

Re: How to reload / reset IOS device via snmp

I just tried to reload a cat3750 running 12.2(25)SEB2 as documented in: http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800c263d.shtml#qa4

It worked once I put the snmp-server system-shutdown in the config.

Here are the steps I performed:

> snmpwalk -c public 14.32.100.13 sysDescr

SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 08-Jun-05 04:49 by yenanh

> snmpset -v 1 -c private 14.32.100.13 tsMsgSend.0 i 2

Error in packet.

Reason: (badValue) The value given has the wrong type or length.

Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0

> telnet 14.32.100.13

Trying 14.32.100.13...

Connected to 14.32.100.13

Escape character is '^]'.

User Access Verification

Password:

nms-3750>en

Password:

nms-3750#conf t

Enter configuration commands, one per line. End with CNTL/Z.

nms-3750(config)#snmp-server syst

nms-3750(config)#snmp-server system-shutdown

nms-3750(config)#exit

nms-3750#wr mem

Building configuration...

[OK]

nms-3750#exit

Connection closed by foreign host.

> snmpset -v 1 -c private 14.32.100.13 tsMsgSend.0 i 2

OLD-CISCO-TS-MIB::tsMsgSend.0 = INTEGER: reload(2)

>

New Member

Re: How to reload / reset IOS device via snmp

thx a lot, the missing "snmp-server system-shutdown" was the reason I got in Problems.

with configured "snmp-server system-shutdown" all works fine.

thx a lot

Red

Re: How to reload / reset IOS device via snmp

I am glad to hear it.

2852
Views
0
Helpful
8
Replies
CreatePlease login to create content