how to see the logged in users in Cisco ACS 4.1?

[Anand Narayana]

Hi,

i have configured the Cisco ACS 4.1 server, my switch is getting authenticated via Cicso ACS, now i could able to see the failed & passed authentication with the IP address from which i logged in, but when i see the "Logged in users" it shows 0, so any setting i need to make in my switch or else the ACS?

aaa new-model

aaa authentication login default group radius enable

aaa authentication enable default enable

aaa authentication ppp default group radius

aaa authorization network default group radius

aaa accounting send stop-record authentication failure

radius-server host 10.203.1.92 auth-port 1812 acct-port 1813 key ****

radius-server retransmit 3

[drolemc]

If a connection is so brief that there is little time between the start and stop packets (for example, HTTP through the PIX Firewall), the Logged in Users report may fail.Refer URL

http://cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a00806fe1f8.html#wp1025869