Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to start DCA server

I have installed LMS 2.6. However the error message DCA server down pops up. How can I start the DCA server. Iam new to ciscowors and could not find the option for the above.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: how to start DCA server

I see your problem. Your COMPUTERNAME is now KSWANLMS, but it used to be KSWAN_LMS when LMS was first installed. This is causing your problem. You need to follow the steps at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.0/user/guide/diagnos.html#wp1078582 to teach LMS the new hostname. Additionally, there is one other registry key under HKLM\SOFTWARE\Cisco that will have the old hostname. Change all instances of the old name to the new name.

If after all of this, the hostname is still KSWAN_LMS in sso.properties, modify the hostname there, then restart dmgtd.

8 REPLIES
Cisco Employee

Re: how to start DCA server

The DCRServer daemon will come up automatically provided there are no issues. If it is not started, that points to a problem with either it, or one of its dependencies. Please post the output of pdshow as well as the NMSROOT/MDC/tomcat/logs/stdout.log.

New Member

Re: how to start DCA server

Hi clarke..

Thanks for ur response. Iam attaching both the files along. It woulf be very helpful if you can find me a solution

rgds

rajesh

Cisco Employee

Re: how to start DCA server

Please post NMSROOT/lib/classpath/sso.properties.

New Member

Re: how to start DCA server

hi clarke..

srry for the late response.

Iam attaching the file you have asked for.

thanks and regards

Rajesh

Cisco Employee

Re: how to start DCA server

Please post the output of "set" from a DOS command prompt.

New Member

Re: how to start DCA server

Hi clarke,

Iam attaching thhe file along.

rgds

Rajesh

Cisco Employee

Re: how to start DCA server

I see your problem. Your COMPUTERNAME is now KSWANLMS, but it used to be KSWAN_LMS when LMS was first installed. This is causing your problem. You need to follow the steps at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.0/user/guide/diagnos.html#wp1078582 to teach LMS the new hostname. Additionally, there is one other registry key under HKLM\SOFTWARE\Cisco that will have the old hostname. Change all instances of the old name to the new name.

If after all of this, the hostname is still KSWAN_LMS in sso.properties, modify the hostname there, then restart dmgtd.

New Member

Re: how to start DCA server

Hi clarke..

Thanks a lot for that support. It is working fine now.

Thanks and regards

Rajesh

225
Views
0
Helpful
8
Replies