Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HSRP Catalyst 4006 troubles

Hello,

i have some troubles on my core network sometimes vlans go down and in my logs i have the following errors :

13: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Standby -> Active

Jan 16 23:45:13: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Standby -> Active

Jan 16 23:45:14: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Standby -> Active

Jan 16 23:45:14: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Standby -> Active

Jan 16 23:45:40: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Active -> Speak

Jan 16 23:45:40: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Active -> Speak

Jan 16 23:45:40: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Active -> Speak

Jan 16 23:45:41: %STANDBY-6-STATECHANGE: Standby: 120: Vlan520 state Active -> Speak

Jan 16 23:45:42: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Active -> Speak

Jan 16 23:45:50: %EC-5-UNBUNDLE: Interface Gi1/1 left the port-channel Po5

Jan 16 23:45:50: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Speak -> Standby

Jan 16 23:45:50: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Speak -> Standby

Jan 16 23:45:50: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Speak -> Standby

Jan 16 23:45:51: %STANDBY-6-STATECHANGE: Standby: 120: Vlan520 state Speak -> Standby

Jan 16 23:45:52: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Speak -> Standby

Jan 16 23:45:57: %EC-5-BUNDLE: Interface Gi1/1 joined port-channel Po5

Jan 16 23:45:58: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Standby -> Active

Jan 16 23:45:58: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Standby -> Active

Jan 16 23:45:59: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Standby -> Active

Jan 16 23:45:59: %STANDBY-6-STATECHANGE: Standby: 120: Vlan520 state Standby -> Active

Jan 16 23:46:00: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Standby -> Active

Jan 16 23:46:27: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Active -> Speak

Jan 16 23:46:27: %STANDBY-6-STATECHANGE: Standby: 120: Vlan520 state Active -> Speak

Jan 16 23:46:27: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Active -> Speak

Jan 16 23:46:29: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Active -> Speak

Jan 16 23:46:29: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Active -> Speak

Jan 16 23:46:37: %STANDBY-6-STATECHANGE: Standby: 142: Vlan142 state Speak -> Standby

Jan 16 23:46:37: %STANDBY-6-STATECHANGE: Standby: 120: Vlan520 state Speak -> Standby

Jan 16 23:46:37: %STANDBY-6-STATECHANGE: Standby: 101: Vlan1 state Speak -> Standby

Jan 16 23:46:39: %STANDBY-6-STATECHANGE: Standby: 117: Vlan517 state Speak -> Standby

Jan 16 23:46:39: %STANDBY-6-STATECHANGE: Standby: 116: Vlan516 state Speak -> Standby

my configuration is 2 CATALYSTS 4006 with HSRP g1/1 and g1/2 are in port channel for back to back

thank you

3 REPLIES
New Member

Re: HSRP Catalyst 4006 troubles

no one has any ideas ??

Silver

Re: HSRP Catalyst 4006 troubles

Re: HSRP Catalyst 4006 troubles

Looks like communications to your other core switch was lost. Look at you etherchannel config, logs, etc.

131
Views
0
Helpful
3
Replies
CreatePlease login to create content