Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HUM summary not in Device Center

LMS 3.2.1 with HUM 1.2 . Devices being monitored in HUM do not have HUM summary data in Device Center. This used to be the case but I cannot recall whether has changed only since upgrading to LMS 3.2 or 3.2.1. The devices in question are definitely being monitored by HUM as it appears in device center view as a managing Application. Is this a known issue or can anyone point me in the right direction

  • Network Management
Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: HUM summary not in Device Center

The only thing that would explain this behavior is a problem in the PIDM mapping in the cmf database.  Your log doesn't show the Gosford 6509 Sw 2 device, but I assume one of the 6509s shows itself managed by HUM in Device Center.  In that case, given that the server name is correct, my guess is that the app version in the PIDM_app_device_map table is not 1.2 for these problem devices.  You should contact TAC, and have them walk you through getting this data.  The value in the database could help point to a root cause.

17 REPLIES
Cisco Employee

Re: HUM summary not in Device Center

There is no LMS 3.2.1.  Do you mean you upgraded to HUM 1.2.1?  If you add a poller for a new device (i.e. one not being monitored by HUM) does Device Center have HUM options for it?

New Member

Re: HUM summary not in Device Center

Sorry I meant HUM 1.2.1.

I added a poller for a new device to HUM and there are no HUM options in Device Center. In addition HUM does not show up as a managing Application for this device.

Cisco Employee

Re: HUM summary not in Device Center

You may have a problem with your PIDM data in the cmf database.  Post a screenshot of Device Center showing a device which has a poller configured in HUM.

New Member

Re: HUM summary not in Device Center

see attached screenshot

Cisco Employee

Re: HUM summary not in Device Center

I cannot read DOCX files.  Just post a JPEG.

New Member

Re: HUM summary not in Device Center

try this

Cisco Employee

Re: HUM summary not in Device Center

Is this server integrated with ACS?

New Member

Re: HUM summary not in Device Center

No, no ACS integration for authentication to LMS. We do however use ACS to authenticate for Telnet access to some devices that are managed by LMS.

Cisco Employee

Re: HUM summary not in Device Center

Go to Common Services > Server > Home Page Admin > Application Registration, and unregsiter and reregister "Health and Utilization Monitor".  then see if you can see "Launch Device Dashboard" in Device Center.

665
Views
0
Helpful
17
Replies