Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

I need improve my ip sla icmp based for backup

Hi all,

I use ip sla for backup routes with this example config:

ip sla 1

icmp-echo 33.33.3.3 source-ip 88.88.8.8

timeout 3000

threshold 3

frequency 10

ip sla schedule 1 life forever start-time now

track 123 rtr 1 reachability

ip route 0.0.0.0 0.0.0.0 ATM0.1 track 123

ip route 0.0.0.0 0.0.0.0 FastEthernet0 22.22.22.1 200

then when ping to 33.33.3.3 fail, the first route disappear and second one through FastEthernet0 is my default gateway.

This happend with the first failed packet but i would like that happend after 3 failed pings.

Somebody can help me?

Regards!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: I need improve my ip sla icmp based for backup

You can add the following under your track:

delay down 30

This will delay setting the track object to down for 30 seconds. If, after 30 seconds, it's still down, then the track will go down, and your route will disappear.

1 REPLY
Cisco Employee

Re: I need improve my ip sla icmp based for backup

You can add the following under your track:

delay down 30

This will delay setting the track object to down for 30 seconds. If, after 30 seconds, it's still down, then the track will go down, and your route will disappear.

128
Views
0
Helpful
1
Replies