Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Identify a port on Cat 6500 given the IP address using snmp

Hi: I want to build a script that can identify the port on a switch to which an IP address is connected? Is there a MIB OID I can poll to find the precise port given an IP address?

Thanks

Ravi

1 REPLY
Cisco Employee

Re: Identify a port on Cat 6500 given the IP address using snmp

This is a fairly common question. There is a tech tip on Cisco.com for doing this:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a9b.shtml

The short answer is multiple MIBs will be involved to translate from IP address to port number, but it is doable.

108
Views
5
Helpful
1
Replies
CreatePlease to create content