Identifying an htpps Domain with just the IP Address
We use website filtering software that is unable to provide the domain name of a website if it is HTTPS. It provides the IP address. For example, if a person accessed https://www.securesite.com (and its IP address is 100.100.100.100), in the logs of the software, all I would see is https://100.100.100.100
Which really doesn't help me.
Is there an easy way to capture this information on a Windows system?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...