ignored errors

[mrwilson05]

Hello,

On a customer router their receiving input errors which are all ignored errors, ISP advised they are not seeing any issues on thier end.

Will increasing the buffer size or input que size solve this problem?

Interface stats:

Ethernet1/0 is up, line protocol is up

MTU 1500 bytes, BW 512 Kbit, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 138/255

Encapsulation ARPA, loopback not set

Last clearing of "show interface" counters 2d17h

7827230 packets input, 2584052412 bytes, 160 no buffer

Received 867143 broadcasts, 0 runts, 0 giants, 0 throttles

10510 input errors, 2 CRC, 2 frame, 0 overrun, 10508 ignored

0 input packets with dribble condition detected

3570356 packets output, 614777589 bytes, 0 underruns

[Fernando_Meza]

what is the router's interface E1/0 connected to ..?

I suggest you to perform a physical check to make sure the cables are OK. The router has input errors which could be comming from the device that is directly linked to the E1/0 interface ..

I hope it helps ... pleasa rate it if it does !!