Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Import in RME 4.2 device information from CSM 3.3.1

Hello,

In a previous installation of CSM, RME was able to directly manage devices created in CSM. Now with CSM3.X I've lost this feature.

Any idea of how to solve this, or at least identify what is wrong ?

Thanks,

NH                 

Everyone's tags (4)
6 REPLIES
Cisco Employee

Import in RME 4.2 device information from CSM 3.3.1

RME 4.2 should still take your devices automatically from DCR of CSM. You may want to check if the RME is not configured by mistake for manual sync with DCR.

Usually RME should be in auto-sync with DCR so any device added/removed should automatically be managed/sync'd by RME as well.

This feature should be in :

Resource Manager Essentials > Admin > Device Mgmt > Device Management Settings > Enable Auto Mode (option) > Manage All Devices (option)

For mroe details, please check the guide :

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.2/user/guide/device.html#wp1056105

-Thanks

Vinod

-Thanks Vinod **Rating Encourages contributors, and its really free. **
New Member

Import in RME 4.2 device information from CSM 3.3.1

Hello Vinod,

This setting was already set to auto mode. So it looks like the issue is more between common services and CSM.

I'm able to see the two router manually created in Common Services, and they appear in RME. So maybe my issue is between CS and CSM

Any idea ?

Many thanks for your help,

NH

Cisco Employee

Import in RME 4.2 device information from CSM 3.3.1

That should be very less as a possibility as CS would send device information to all the modules, unless any OGSServer process is down. Please share the screenshot for CS> DCR on how many devices are there and similarly for RME > device management.

If two devices show in RME, please make sure the other devices are not in other state like pending etc. If possible remove the auto sync and try to add the devices manually once and see if that works.

-Thanks

Vinod

-Thanks Vinod **Rating Encourages contributors, and its really free. **
New Member

Import in RME 4.2 device information from CSM 3.3.1

I've manually added in CS a router, it correctly appears in RME (there's only an OID mismatch).

As I've create my router from CSM, is there something to do to sync CS with CSM ?

Or do I need to export my routers from CSM and import CSV file in CS ?

(I don't remember doing this with my old CSM installation)

Thanks,

NH

Cisco Employee

Import in RME 4.2 device information from CSM 3.3.1

Ideally CSM should also get the device information automatically as CS is the main entity to deal with devices addition or removal. But NMS side includes CS and RME modules, whereas CSM is covered by security group.

I dont know if any security folks would have look into this, else you may try post the issue with CSM on CSC's Security forum as well.

-Thanks

-Thanks Vinod **Rating Encourages contributors, and its really free. **
New Member

Import in RME 4.2 device information from CSM 3.3.1

ok,

done,

Thanks for your help,

NH

537
Views
0
Helpful
6
Replies
CreatePlease to create content