Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Importand sync the Switch hosts/IP’s From The LMS to the ACS

I Need to Importand sync the Switch hosts/IP’s From The LMS to the ACS For Create more than one ( Network Devices Group ) on the ACS Coz The Configuration of the ACS server Now is Configured as *.*.*.* ( AAA Client IP Address ) with the IP Address Of the ACS As ( AAA server IP Address ) only.

ACS is (Release 4.0(1) Build 49 ) under Microsoft OS.

LMS 3.2 under solaris 9 with fully integartion with ACS

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

No.  The user-defined fields are unique to LMS, and cannot be pushed to ACS.  You can push the devices themselves from LMS to ACS using the dcrcli command I mentioned previously.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

5 REPLIES
Cisco Employee

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

Are you wanting to create more NDGs for logical separation of management tasks, or are you seeing the *.*.*.* wildcard not work?  If you want to logically segment your devices into multiple NDGs, you will first need to remove the *.*.*.* entry, then create the desired NDGs, and manually add the devices to them.  If, however, you want to explicitly list all devices out in ONE NDG, you can use the dcrcli expAcs command to send all devices from LMS to ACS into one NDG.  For example:

dcrcli -u admin cmd=expAcs hn=acs1.company.com un=admin pwd=admin prt=2002 proto=http seckey=mySecret ndg=MyNDG
New Member

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

Ok ,we are wanting to create more NDGs for logical separation of management  tasks.

Is there any way to sysnc between user files in LMS and NDGs Iin ACS?....

Cisco Employee

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

What do you mean, "user files in LMS?"

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

Sorry, I mean "User Defined Fields" in Ciscoworks

Cisco Employee

Re: Importand sync the Switch hosts/IP’s From The LMS to the A

No.  The user-defined fields are unique to LMS, and cannot be pushed to ACS.  You can push the devices themselves from LMS to ACS using the dcrcli command I mentioned previously.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

201
Views
0
Helpful
5
Replies