Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Impossible to launch RME ???

Hi,

I have rebooted the server , resetcasuser but the RME doesn't want to start.

Error message is the following :

Could not get database connection. Make sure that RME DB server is running. Check RMEHome.log for more details.

Any ideas ?

Please find the log from RMEHome.log :

[ Thu Jul 17 18:36:40 WAT 2008 ],WARN ,[Ajp13Processor[9009][3]],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,?,Got DataRetrivalException while getting devices in RMEEXCP0006: Connection to RME DB Failed. Check the RME DB status.

[ Thu Jul 17 19:09:39 WAT 2008 ],FATAL,[Ajp13Processor[9009][4]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,isJRM,865,RMEHome -->Exception happed in isJRM()com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "JRM" : Not found !!

[ Thu Jul 17 19:09:39 WAT 2008 ],FATAL,[Ajp13Processor[9009][4]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,perform,117,RMEHome --> CTMJRMServer is not running..

[ Thu Jul 17 19:09:40 WAT 2008 ],FATAL,[Ajp13Processor[9009][4]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,isDBRun,845,RMEHOME --> DBEngine is not runningjava.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect

[ Thu Jul 17 19:09:40 WAT 2008 ],ERROR,[Ajp13Processor[9009][4]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,perform,126,RMEHome --> RMEDBEngine is not running..

[ Fri Jul 18 09:03:24 WAT 2008 ],FATAL,[Ajp13Processor[9009][3]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,isJRM,865,RMEHome -->Exception happed in isJRM()com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "JRM" : Not found !!

[ Fri Jul 18 09:03:24 WAT 2008 ],FATAL,[Ajp13Processor[9009][3]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,perform,117,RMEHome --> CTMJRMServer is not running..

[ Fri Jul 18 09:03:25 WAT 2008 ],FATAL,[Ajp13Processor[9009][3]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,isDBRun,845,RMEHOME --> DBEngine is not runningjava.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect

[ Fri Jul 18 09:03:25 WAT 2008 ],ERROR,[Ajp13Processor[9009][3]],com.cisco.nm.rmeng.home.ui.action.RMEHomeAction,perform,126,RMEHome --> RMEDBEngine is not running..

4 REPLIES
Cisco Employee

Re: Impossible to launch RME ???

Please post the output of the pdshow command.

New Member

Re: Impossible to launch RME ???

Hi,

it's ok now I don't understand why ???

but now when I try to generate a syslog report it show me 0 syslogs ????

I have correctly subscribe into RME->Tools->Syslog->Syslog Collector Status

Do you know why ?

Best regards

Olivier

New Member

Re: Impossible to launch RME ???

Please find the end of the AnalyzerDebug.log in debug mode.

[ Mon Jul 21 11:24:48 WAT 2008 ],ERROR,[Thread-7],java.sql.SQLException: JZ0S2: Statement object has already been closed.

[ Mon Jul 21 11:24:48 WAT 2008 ],ERROR,[Thread-7],java.sql.SQLException: JZ0C0: Connection is already closed.

[ Mon Jul 21 11:24:48 WAT 2008 ],ERROR,[Thread-7], Unable to initialize logging infrastructure for localization

[ Mon Jul 21 11:24:48 WAT 2008 ],ERROR,[Thread-7],No resource is associated with key "Unable to initialize logging infrastructure for localization".

[ Mon Jul 21 11:24:48 WAT 2008 ],ERROR,[Thread-7],Unable to initialize logging infrastructure for localization

New Member

Re: Impossible to launch RME ???

This has solved my Syslog pb.

- reset the rme database:

Open a DOS shell and issue the command:

net stop crmdmgtd

Once you get the prompt back, open up the task manager and go to processes.

If any of these processes are listed, kill them manually:

sm_server

sm_authority

brstart

Now, go to CSCOpx\bin and issue the commands (case sensitive):

perl dbRestoreOrig.pl dsn=rmeng dmprefix=RME

To re-start the CiscoWorks application:

net start crmdmgtd

410
Views
5
Helpful
4
Replies