We have a Cisco3845 router that acts as a VoIP gateway that is, it converts TDM traffic from the Public Switched Telephone Network (PSTN) into H.323 traffic. My problem is that we would like to know how many calls are going through the gateway and represent this information in diagram format by using Cacti, for example. But I can't seem to find an OID that is responsible for this kind of data. In fact, I have found a few OIDs but SNMP Object Navigator (cisco.com) says that I can't retrieve their entries because they have the status "Permission: not-accessible". If someone knows how to approach this problem or have any suggestions, your help will be greatly appreciated. Thanks.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...