I am trying to install the Rtr7000, RME device package, so that we can get the configs for the 7606-S switch. From the gui we select the libswim.rme40.v1-8-4.zip, SharedDcmaIOS.RME40.v1-6-3.zip, LibInventory.RME40.v1-11-5.zip, SharedInventoryCatSwitchRME40.v1-7-4.zip, SharedInventoryRouter.RME40.v1-5-2.zip and Rtr7000.RME40.v5-4.zip. It fails with the following error "SharedSwimRtr800 Warning: SharedSwimIOS (1.11.7) Consistency check failed for base package SharedSwimRtr800"
No. This means that you are missing a dependency for SharedSwimRtr800. These kind of problems are usually found on Windows, and usually point to a bad base RME installation. This is recoverable, but you'll need to contact TAC to get the procedure.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...