Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Installation

Hello i would like to know if i can install in a same server:

CiscoWorks LMS and Cisco Unified operation Manager

or

Cisco Service Monitor and Cisco Unified Operation Manager.

or maybe its necessary each tool separately one from each other???

Sincerely

Jose

5 REPLIES
New Member

Re: Installation

Hi Jose,

You cannot install any other software on the LMS server as LMS requires a dedicated server.

You can however install CUOM, CUSM, and CUSSM on the same server if you have less than 10000 phones. Refer to the link below.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/2.1/device_support/table/OMdvs21-sdt.html#wp41595

New Member

Re: Installation

A tiny correction: CUOM, CUSM and CUSSM can coexist if you have less then 1000 phones, not 10000.

New Member

Re: Installation

Hi,

I have confirmed with the CUOM product team here at Cisco and CUOM, CUSM, & CUSSM can be coresident if there are less than 10k phones. Can you please let me know where you received the information that the limit was 1k phones?

New Member

Re: Installation

Hi spaladug,

Sorry - I was sure that I read somewhere in the CUSSM documentation that the limit was around 1k phone but of cause I can't find it anymore.

In the document "CUSSM 1.0 Deployment Best Practices" the limit for a coresident deployment is 5k...

Again sorry but thank you for this valuable information.

Best regards

Johnny

New Member

Re: Installation

CUSSM 1.0 was designed to work with CUOM 2.0.1, 2.0.2, and 2.0.3 and in that scenario 5k was the limit.

CUSSM 1.1 is designed to work with CUOM 2.l and the limit is 10k for coresidency.

--Sri

140
Views
8
Helpful
5
Replies
CreatePlease to create content