Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Interface problem

on my switch I am getting this log message:

Logging history:

2007-03-17 12:21:07 @5-LINKUPDOWN:Gi0/10 changed state to down

2007-03-17 12:21:07 @5-LINKUPDOWN:Gi0/11 changed state to down

2007-03-17 12:21:10 @5-LINKUPDOWN:Gi0/10 changed state to up

2007-03-17 12:21:10 @5-LINKUPDOWN:Gi0/11 changed state to up

The interface goes DOWN & UP for a small fraction of time. My servers are connected to this port.Hence the application hangs & afterwords need to restart the services. pls help to identify the problem for this.

Duplex settings - FULL

Speed - Auto

1 REPLY

Re: Interface problem

Hi Arvind,

What is the OS of the servers connected, Duplex and Speed setting.

Suggest to set

Duplex full

Speed 100

Monitor the sh int on router / Switch and try tweeking the above both ends... You will succeed if there is no hardware problem.

You can also try changing the ports if you have free ones.

Regards

S. Shantharam

91
Views
0
Helpful
1
Replies
CreatePlease to create content