Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Inventory collection failed with 6500 VSS

The inventory Collection fails with 6500 (VS-S720-10G) running 12.2.33SXI1.

The server is running LMS 3.2 with RME 4.3.1 on Solaris 10. Thx for your suggestions. Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Inventory collection failed with 6500 VSS

Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this device. Increase the SNMP timeout to 10, then apply your changes, and inventory collection should work.

3 REPLIES
Cisco Employee

Re: Inventory collection failed with 6500 VSS

Post the IC_Server.log.

New Member

Re: Inventory collection failed with 6500 VSS

Hi, Here is the IC-Server File. Thanks a lot for your help. Rgards

Cisco Employee

Re: Inventory collection failed with 6500 VSS

Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this device. Increase the SNMP timeout to 10, then apply your changes, and inventory collection should work.

291
Views
0
Helpful
3
Replies