Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgrade (deployment) with NCM

Hello,

I am using the current evaluation version of CiscoWorks Network Compliance Manager. I am trying to update the IOS on one of my switches using the "Update Device Software" Task from the NCM.

I am doing the following steps:

1. Menu -> Devices -> Device Tools -> Software Images

2. I use the "update Device" Link for the Image I want to deploy (downloaded it from cisco.com before, so it is already in the Software repository)

3. I enter the IP from the switch I want to update

4. The page reloads itself (!) and shows me the files that are currently on the device

5. I can select which files I would like to remove, but there is nothing to specify which files I would like to add. The "Adding" line says "No files being added" and it seems as if NCM totally forgot, that I have already chosen the image before.

Even if I try other ways (e.g. the OS Analysis") to navigate to that point its always the same.

If I do an "Image synchronization" to Backup the installed IOS image, I can redeploy the image, but I can't upgrade it.

Task output:

"Step 1 Snapshot task preceding software update result: succeeded View Result

Step 2 Delete image task: c2950-i6k2l2q4-mz.121-22.EA12.bin succeeded

Step 3 Software upload of image: c2950-i6k2l2q4-mz.121-22.EA12.bin succeeded

Step 4 Finalize memory script succeeded

Step 5 Discovery task following software update result: succeeded View Result

Step 6 Snapshot task after software update result: succeeded View Result

Step 7 File System Diagnostic task following software update result: succeeded View Result"

I have read the User Guide and the online help files, but I couldn't find out what I am doing wrong.

Regards,

Christian

Maybe I should add that the IOS to upgrade is newer than the one currently on the device and that there are no error messages or restrictions (RAM size or cpu type). Only the currently installed must be deleted during upgrade process, before the new IOS can be uploaded to the device.

1 REPLY
New Member

Re: IOS upgrade (deployment) with NCM

Hello,

I was able to solve the problem alone.

The problem is, that when I download an image after an OS Analysis from cisco.com (the recommended image) it is stored in the repository with the required Model "C2950".

However the automatic driver detection detected my Switch as "WS-C2950T-24 (C2950 series)" and NCM does not recognize the match between a "C2950" and a "C2950 series". If I edit the downloaded Image Set that it applies to all C2950 series Switches it works fine.

A bit tricky, because I thought NCM would know to which Series the Devices belong.

Regards,

Christian

575
Views
0
Helpful
1
Replies