Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

IOS upgrade through RME

Hi

I am using Cisco Works 2.6, RME 4.0.5 and want to upgrade the IOS of a WS-C3750-24TS-E switch. I have downloaded the IOS "c3750-advipservicesk9-mz.122-25.SEE4.bin" from cisco and added it to software repository through rme->software mgmt->software repository->add.

Now I selected the IOS and selected update status after which the IOS status changed to "not deffered".

Now to upgrade the ios on switches,which are detected as "Cisco 3750 Stack " , chossing software distribution -> by image . Then selecting the same IOS and device from select image and device window. after selecting next it shows me device name , module information and storage option properly. On the next step in verification window I am getting the following errors in verification details...

---------------------------------

testsw

---------------------------------

File_Name : /c3750-i5-mz.121-19.EA1d.bin

File_Size : Unknown

Family : C3750

Version : 12.1(19)EA1d

BOOTROM : Bootstrap program is C3750 boot loader

RAM : 134209536

Feature : LAYER_3|MIN_DRAM_MEG=64

Media : RAM

Image_Type : SYSTEM_SW

Software_Name : C3750-I5-M

SOURCE : flash:

UPGRADETYPE : ACTIVE

Flash Information

---------------------------------

Flash Name : flash

Flash Size : 15991309

Flash Free : 11938304

Verification Errors And Warnings

-----------------------------------------------------------------------------------------------------

SWIM1063: Minimum RAM requirement of the selected image cannot be determined.

RAM available on the device may not be enough to activate this image.

Update the minimum RAM value using View/Edit Image attributes or

make sure that the device has enough RAM to activate the selected image or select a different image.

SWIM1110: .bin images are not supported for Stack Upgrade.

Select a tar image for Stack Upgrade.

Pls let me know where I am wrong and what exact I have to do the upgrade IOS.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: IOS upgrade through RME

Hi,

I think you should download the tar-file of the IOS you want to use like the error SWIM1110 tells it.

Because the Stack-Switches can't use bin-files.

Sven

4 REPLIES
Bronze

Re: IOS upgrade through RME

Hi,

I think you should download the tar-file of the IOS you want to use like the error SWIM1110 tells it.

Because the Stack-Switches can't use bin-files.

Sven

Re: IOS upgrade through RME

But this switch is not connected to any stack.

Bronze

Re: IOS upgrade through RME

In the repository you can select the IOS.

There you can modify the "Minium RAM" and "Minimum Flash".

This informations you can get from cisco.com I think.

Then the first error message should be fixed.

Sven

Re: IOS upgrade through RME

Thanks sven..

well I resolved the problem . It was only because of that .tar format image. I had downloaded that from cisco site and upgraded the IOS of that switch.

353
Views
0
Helpful
4
Replies