Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgrade using LMS3.2

Hi All,

I want to upgrade a Cisco 6509-E to a newer IOS using LMS3.2 (never done it before using LMS).  The switch has a flash disk size of 128Megs and the current IOS is about 80Megs, so there is only about 46 Megs available on the flash card.  Questions?

Is the behaviour of LMS to delete the current IOS version on the flash card if not enough space available for the new one? Or do I need to buy a bigger card? And any tips are welcome for the ones that have done it before this way....

Thank you in advance....

Cheers!

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: IOS upgrade using LMS3.2

Hi,

LMS should delete the present IOS version.

But in that case you don't have the now running IOS version for emergency fallback or something like that.

Sven

1 REPLY
Bronze

Re: IOS upgrade using LMS3.2

Hi,

LMS should delete the present IOS version.

But in that case you don't have the now running IOS version for emergency fallback or something like that.

Sven

176
Views
0
Helpful
1
Replies