Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

IP SLA and IP route tracking

Below is my configuration for tracking.

<code>

track 123 rtr 1 reachability

!

interface Vlan1

description primary-link

ip address 10.1.2.71 255.255.255.0

!

interface Vlan2

description backup-link

ip address 192.168.4.254 255.255.255.0

!

ip local policy route-map MY-LOCAL-POLICY

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 10.1.2.17 track 123

ip route 0.0.0.0 0.0.0.0 192.168.4.5 254

!

ip sla 1

icmp-echo 10.1.2.17

timeout 1000

threshold 2

frequency 3

ip sla schedule 1 life forever start-time now

access-list 101 permit icmp any host 10.1.2.17 echo

!

route-map MY-LOCAL-POLICY permit 10

match ip address 101

set ip next-hop 10.1.2.17

set interface Null0

</code>

<code>

Router#sh ip sla stat

Round Trip Time (RTT) for Index 1

Latest RTT: 1 milliseconds

Latest operation start time: *16:32:49.411 UTC Sun Jul 14 2002

Latest operation return code: OK

Number of successes: 56

Number of failures: 2

Operation time to live: Forever

</code>

<code>

Router#show ip route track-table

ip route 0.0.0.0 0.0.0.0 10.1.2.17 track 123 state is [up]

Router#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2

i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

ia - IS-IS inter area, * - candidate default, U - per-user static route

o - ODR, P - periodic downloaded static route

Gateway of last resort is 10.1.2.17 to network 0.0.0.0

10.0.0.0/24 is subnetted, 1 subnets

C 10.1.2.0 is directly connected, Vlan1

S* 0.0.0.0/0 [1/0] via 10.1.2.17

Router#</code>

Once I pull the ethernet cable for the 10.1.2.0 network everything appears to work except for one thing, the routing table.

<code>

Router#

*Jul 14 16:34:44.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down

*Jul 14 16:34:44.251: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down

*Jul 14 16:34:45.255: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down

*Jul 14 16:34:45.807: %TRACKING-5-STATE: 123 rtr 1 reachability Up->Down

Router#show ip route track-table

ip route 0.0.0.0 0.0.0.0 10.1.2.17 track 123 state is [down]

Router#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2

i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

ia - IS-IS inter area, * - candidate default, U - per-user static route

o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

Router#</code>

Shouldn't I see the default route set to 192.168.4.5?

1 REPLY

Re: IP SLA and IP route tracking

Might help if I bring VLAN2 up. Sorry.

9665
Views
0
Helpful
1
Replies