Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IP SLA MIB

Hi,

According to Cisco online documentation the MIB for IP SLA is RTTMON-MIB and the IOS config is:

snmp-server enable traps rtr

Unfor, the 7201 I'm working with only has the following IPSLA trap config option

snmp-server enable traps ipsla

Does the MIB still work? I can't seem to find anything in regards to this new command.

Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4(20)T, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Fri 11-Jul-08 05:00 by prod_rel_team

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: IP SLA MIB

Yes. The name has been changed quite a few times since its inception. First, the feature was called "Response Time Reporter" (rtr). Then, it was changed to "Service Assurance Agent" (SAA). Now it's called "IP Service Level Agreement" (IP SLA).

Enabling ipsla traps will enable the traps documented in the CISCO-RTTMON-MIB. On older versions of IOS, the command would be "snmp-server enable traps rtr".

2 REPLIES
Cisco Employee

Re: IP SLA MIB

Yes. The name has been changed quite a few times since its inception. First, the feature was called "Response Time Reporter" (rtr). Then, it was changed to "Service Assurance Agent" (SAA). Now it's called "IP Service Level Agreement" (IP SLA).

Enabling ipsla traps will enable the traps documented in the CISCO-RTTMON-MIB. On older versions of IOS, the command would be "snmp-server enable traps rtr".

Community Member

Re: IP SLA MIB

Thanks!

1416
Views
0
Helpful
2
Replies
CreatePlease to create content