Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPM 4.0.1 issue when adding devices in sources devices

Hello,

When I add devices as sources devices, 'collector mgmt' 'devices' i check the box 'All devices' and then clic to 'Add devices', i arrived on the next page, there is no equipement to select ? why ?

Finaly I used the CiscoWorks Assitant to add devices in IPM, he say me that the devices successfull added to IPM... but there is nothing.

When I look in targets devices I see all the equipments

It is necessary to have RW community configure in DCR CS ?

Can I used IPM just to check and IP SLA counters configure on devices, or IPM has necessarily to send the configuration to the equipment ?

Thanks

Hervé

1 REPLY
Silver

Re: IPM 4.0.1 issue when adding devices in sources devices

Do you have either rtr enable or ip sla enable on all of your devices ?

Dont use assitant for IPM, use IPM to add devices.

You need to have the RW string and IPM needs to push the configs.

99
Views
5
Helpful
1
Replies