Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
808
Views
0
Helpful
8
Replies

IPM Help

Go to solution
turfsniffer0
Level 1
Level 1

‎07-15-2010 04:32 AM

Hello we've been successfully using IPM 2.4 from Ciscoworks 2000 for last 8 years. We recently migrated to LMS3.1 and all is ok except I'm unable to get the new IPM to work. I think the problem is down to something I'm missing or doing wrong...so if i can describe what we do and then describe how IPM is currently configured perhaps some good soul can point me in right direction to resolving it?

We have a webserver sitting on a server in our DataCentre and it hold 8 pdf files of various sizes.

We configure 42 routers to send a http get request to access each of these files via IPM and we measure response times etc., Reports are generated twice weekly for our customer.

In IPM 2.4 we created 8 different HTTP operations naming them STM-A, STM-B, STM-C...and so on. Each one pointing to a pdf file on webserver on the operation. We create 8 collectors for each router - and each collector points to the HTTP operations created. (hope I'm making sense!!!). We do not use Targets. It all works.

Initially when trying to replicate the settings used in 2.4 i had serious problems getting it work in the new IPM.

First it would not let me create a collector without selecting a target (for this i created a ad hoc target for the server hosting the pdf files). It would create the collectors and i can see them, but it doesn't seem to send the the configurations to the routers (all 1720's btw - but they do work on the old IPM).

I think i got it working once but i couldn't get the reports working....its a nightmare thats been going on for the last few months and i just need some guidance. I can provide screenshots, logs etc., if required.

thanks in advance.

Steve

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to turfsniffer0

‎07-16-2010 10:02 AM

The IPM graphs now use Flash, so make sure you have Flash 9 or higher installed in your browser.  Given that the collectors are completing

successfully, you should see data points being drawn in the live Monitor graph.  It should take two minutes to see the first point.

View solution in original post

0 Helpful
8 Replies 8

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee

‎07-15-2010 07:32 PM

Creating an adhoc target was the right thing to do.  The next thing to do is to create a custom HTTP operation which points to the appropriate relative URL on the server.  You can choose to use a custom DNS server, or just have IP SLA use the DNS which is configured on the device.  The final step is to define a Collector where you pick the device, the adhoc target, and your custom HTTP operation.  If this gets installed down to the source device successfully, but you are still unable to monitor the latency, post the output of "show ip sla conf" from the source device.

0 Helpful

Go to solution
turfsniffer0
Level 1
Level 1
In response to Joe Clarke

‎07-16-2010 02:09 AM

Thanks for taking the time to reply

After posting, I was able to manually create 8 tests and I could see the tests configured on the routers, but when trying to generate reports it shows nothing. I've also tried the Graph option in the Collector Management section IPM>Collector Mgmt>Collectors but it returns "No data available for the selected time period."

IOS version 12.2(40a) so I'm using the old RTR commands! Not sure if there's a compatability issue with this old IOS and the new IPM but I'm guessing its ok as the configs look exactly the same on the routers when using the old IPM.

PS_xxxxxx_Scarva#sh rtr conf

Complete Configuration Table (includes defaults)

Entry Number: 19573

Owner: ipm|CISCOVMS002

Tag: test_10x.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-H.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 38060

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-A.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 117946

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-E.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 127512

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-C.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 136790

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-F.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 186572

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-G.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 203012

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-B.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

Entry Number: 203351

Owner: ipm|CISCOVMS002

Tag: test_10.x.x.x

Type of Operation to Perform: http

Reaction and History Threshold (milliseconds): 5000

Operation Frequency (seconds): 300

Operation Timeout (milliseconds): 5000

Verify Data: FALSE

Status of Entry (SNMP RowStatus): active

Protocol Type: httpAppl

Target Address:

Source Address: 0.0.0.0

Target Port: 0

Source Port: 0

Request Size (ARR data portion): 1

Response Size (ARR data portion): 1

Control Packets: enabled

Loose Source Routing: disabled

LSR Path:

Type of Service Parameters: 0x0

HTTP Operation: get

HTTP Server Version: 1.0

URL: http://10.x.x.x:80/OSPF-D.pdf

Proxy:

Raw String(s):

Cache Control: disabled

Life (seconds): infinite - runs forever

Next Scheduled Start Time: Start Time already passed

Entry Ageout (seconds): 3600

Connection Loss Reaction Enabled: FALSE

Timeout Reaction Enabled: FALSE

Threshold Reaction Type: never

Threshold Falling (milliseconds): 3000

Threshold Count: 5

Threshold Count2: 5

Reaction Type: none

Verify Error Reaction Enabled: FALSE

Number of Statistic Hours kept: 2

Number of Statistic Paths kept: 1

Number of Statistic Hops kept: 1

Number of Statistic Distribution Buckets kept: 1

Statistic Distribution Interval (milliseconds): 20

Number of History Lives kept: 0

Number of History Buckets kept: 15

Number of History Samples kept: 1

History Filter Type: none

0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to turfsniffer0

‎07-16-2010 08:30 AM

Post the output of "show rtr coll".  If you click the Monitor button under Collector Mgmt do you see any graphs?  The reports and Graph button will take

much more time to populate with data.  The Monitor button will allow you to monitor your collector in real time.

0 Helpful

Go to solution
turfsniffer0
Level 1
Level 1
In response to Joe Clarke

‎07-16-2010 09:06 AM

Hi Joseph,

The monitor button displayed an empty graph, and i keep the window open for 30 mins or so but no tracking info.

I actually looked at the "sh rtr coll" command earlier and noticed that the collectors where going over the configured threshold (I left them on the default values). TestA seems to be ok on the default values. Although the others all showed that they were over the thresehold...so I reconfigured the threseholds for TestB operation and this seemed to work (in that I don't see any Overthresholds clocking up)...

Default for A,C,D,E,F,G

Timeout Value(msecs):  5000
Threshold(msecs):  5000
Sample Interval(secs):  300

Setting for B

Miscellaneous Settings
Timeout Value(msecs):  5000
Threshold(msecs):  7000
Sample Interval(secs):  300

heres the output of "sh rtr coll" after changing TestB operation. I guess the thresehold needs to be higher?


Entry Number: 19573
HTTP URL: http://10.x.x.x:80/OSPF-H.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 13380
             OvrTh: 12             RTTMax: 15300
        DNSTimeOut: 0              RTTSum: 167000
        TCPTimeOut: 0             RTTSum2: 2326483870
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 105
         HTTPError: 0            TransRTT: 166895
          IntError: 0            MesgSize: 8255556
            Busies: 0


Entry Number: 19573
HTTP URL: http://10.x.x.x:80/OSPF-H.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 13418
             OvrTh: 1              RTTMax: 13418
        DNSTimeOut: 0              RTTSum: 13418
        TCPTimeOut: 0             RTTSum2: 180042724
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 13410
          IntError: 0            MesgSize: 687963
            Busies: 0


Entry Number: 38060
HTTP URL: http://10.x.x.x:80/OSPF-A.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 545
             OvrTh: 0              RTTMax: 1181
        DNSTimeOut: 0              RTTSum: 10790
        TCPTimeOut: 0             RTTSum2: 10211200
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 107
         HTTPError: 0            TransRTT: 10683
          IntError: 0            MesgSize: 140424
            Busies: 0


Entry Number: 38060
HTTP URL: http://10.x.x.x:80/OSPF-A.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 724
             OvrTh: 0              RTTMax: 724
        DNSTimeOut: 0              RTTSum: 724
        TCPTimeOut: 0             RTTSum2: 524176
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 716
          IntError: 0            MesgSize: 11702
            Busies: 0


Entry Number: 117946
HTTP URL: http://10.x.x.x:80/OSPF-E.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 10386
             OvrTh: 12             RTTMax: 11462
        DNSTimeOut: 0              RTTSum: 129836
        TCPTimeOut: 0             RTTSum2: 1405749174
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 106
         HTTPError: 0            TransRTT: 129730
          IntError: 0            MesgSize: 4785024
            Busies: 0


Entry Number: 117946
HTTP URL: http://10.x.x.x:80/OSPF-E.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 10391
             OvrTh: 1              RTTMax: 10391
        DNSTimeOut: 0              RTTSum: 10391
        TCPTimeOut: 0             RTTSum2: 107972881
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 10383
          IntError: 0            MesgSize: 398752
            Busies: 0


Entry Number: 127512
HTTP URL: http://10.x.x.x:80/OSPF-C.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 8366
             OvrTh: 12             RTTMax: 8715
        DNSTimeOut: 0              RTTSum: 102440
        TCPTimeOut: 0             RTTSum2: 874604482
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 105
         HTTPError: 0            TransRTT: 102335
          IntError: 0            MesgSize: 3308772
            Busies: 0


Entry Number: 127512
HTTP URL: http://10.x.x.x:80/OSPF-C.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 8156
             OvrTh: 1              RTTMax: 8156
        DNSTimeOut: 0              RTTSum: 8156
        TCPTimeOut: 0             RTTSum2: 66520336
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 8148
          IntError: 0            MesgSize: 275731
            Busies: 0


Entry Number: 136790
HTTP URL: http://10.x.x.x:80/OSPF-F.pdf
Start Time: 15:32:46.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 13358
             OvrTh: 12             RTTMax: 15263
        DNSTimeOut: 0              RTTSum: 166206
        TCPTimeOut: 0             RTTSum2: 2304442542
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 103
         HTTPError: 0            TransRTT: 166103
          IntError: 0            MesgSize: 8267256
            Busies: 0


Entry Number: 136790
HTTP URL: http://10.x.x.x:80/OSPF-F.pdf
Start Time: 16:32:46.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 13273
             OvrTh: 1              RTTMax: 13273
        DNSTimeOut: 0              RTTSum: 13273
        TCPTimeOut: 0             RTTSum2: 176172529
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 13265
          IntError: 0            MesgSize: 688938
            Busies: 0


Entry Number: 186572
HTTP URL: http://10.x.x.x:80/OSPF-G.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 4769
             OvrTh: 11             RTTMax: 5883
        DNSTimeOut: 0              RTTSum: 65594
        TCPTimeOut: 0             RTTSum2: 359900562
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 103
         HTTPError: 0            TransRTT: 65491
          IntError: 0            MesgSize: 1856172
            Busies: 0


Entry Number: 186572
HTTP URL: http://10.x.x.x:80/OSPF-G.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 4725
             OvrTh: 0              RTTMax: 4725
        DNSTimeOut: 0              RTTSum: 4725
        TCPTimeOut: 0             RTTSum2: 22325625
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 9
         HTTPError: 0            TransRTT: 4716
          IntError: 0            MesgSize: 154681
            Busies: 0


Entry Number: 203012
HTTP URL: http://10.x.x.x:80/OSPF-B.pdf
Start Time: 16:20:30.000 BST Fri Jul 16 2010

             Comps: 3              RTTMin: 1121
             OvrTh: 0              RTTMax: 1751
        DNSTimeOut: 0              RTTSum: 4020
        TCPTimeOut: 0             RTTSum2: 5640546
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 31
         HTTPError: 0            TransRTT: 3989
          IntError: 0            MesgSize: 334260
            Busies: 0


Entry Number: 203351
HTTP URL: http://10.x.x.x:80/OSPF-D.pdf
Start Time: 15:32:45.000 BST Fri Jul 16 2010

             Comps: 12             RTTMin: 10229
             OvrTh: 12             RTTMax: 11345
        DNSTimeOut: 0              RTTSum: 127819
        TCPTimeOut: 0             RTTSum2: 1362276531
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 106
         HTTPError: 0            TransRTT: 127713
          IntError: 0            MesgSize: 4578072
            Busies: 0


Entry Number: 203351
HTTP URL: http://10.x.x.x:80/OSPF-D.pdf
Start Time: 16:32:45.000 BST Fri Jul 16 2010

             Comps: 1              RTTMin: 10012
             OvrTh: 1              RTTMax: 10012
        DNSTimeOut: 0              RTTSum: 10012
        TCPTimeOut: 0             RTTSum2: 100240144
        TraTimeOut: 0              DNSRTT: 0
          DNSError: 0           TCPConRTT: 8
         HTTPError: 0            TransRTT: 10004
          IntError: 0            MesgSize: 381506
            Busies: 0

0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to turfsniffer0

‎07-16-2010 10:02 AM

The IPM graphs now use Flash, so make sure you have Flash 9 or higher installed in your browser.  Given that the collectors are completing

successfully, you should see data points being drawn in the live Monitor graph.  It should take two minutes to see the first point.

0 Helpful

Go to solution
turfsniffer0
Level 1
Level 1
In response to Joe Clarke

‎07-19-2010 03:29 AM

Hi Joseph,

This morning I changed the thresholds for all of the operations and I can now see data in the monitor graph for all of them. Thanks for helping there. My main issue though is still with generating reports.

After verifying that all the collectors are displaying realtime graphs I left it running for over an hour and tried to generate an hourly report. The report only had data for testA (which was working anyway)....it had no report data held for the remaining 7 collectors. I've attached a screenshot of the report.

Perhaps i should delete the collectors, recreate them and leave it running for awhile and try again. Actually I'll try that now....

cheers

Steven

Preview file
123 KB
0 Helpful

Go to solution
turfsniffer0
Level 1
Level 1
In response to turfsniffer0

‎07-19-2010 07:25 AM

I tried recreating the collectors and used a different router and appears to be the same issue. Test A gives results - other collectors don't. I guess i possibly need to revise the thresholds configured on the http operations created. I'm not sure i fully understand why though because the threshold on the old IPM are the same and work fine. I'll now toggle the threseholds and see if i can get the reports to pull data for the other collectors.

0 Helpful

Go to solution
turfsniffer0
Level 1
Level 1
In response to turfsniffer0

‎08-02-2010 06:25 AM

It seems that the reporting issue is seperate from the issue i was having with collectors. I can now see collectors and monitor stats but reports won't pull data for the majority of the collectors created.

0 Helpful
Customers Also Viewed These Support Documents