Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

IPM

Hi,

am having issues with IPM aaplication working as expected, it sees the devices but cannot manage as expected.

What could be wrong, please advice on what to do to correct.

Thanks.

4 REPLIES
Blue

Re: IPM

Can you explain how IPM is not working as expected? Are you trying to add the devices as IP SLA source or target (responder)?

Which version of IPM are you using? What version(s) of IOS are the problematic devices running?

Do you have the correct SNMP read/write community string for these devices configured in the IPM (or in DCR if LMS 3.x)?

Can you configure "ip sla monitor ###" or "rtr ###" on the devices' own command line?

New Member

Re: IPM

Am using the current version 3.0.2 for IPM. For my IOS, I have 12.1,12.2,12.3 and 12.4 but the issue is that none is being managed buy IPM.

Please advice on what to do.

Thanks.

New Member

Re: IPM

Hi,

Here is the screen shot of IPM application.

Can someone please kindly take a look at it and please let me know where have gone wrong.

Thanks, Cheers.

Silver

Re: IPM

Your slave with IPM can't talk to the DCR Master server.

Check your certificates and reachability under Common Services, Security, Multi-server trust management, Peer server Certificate Setup

Also ensure that your system identity setup is identical for all servers, master and slaves.

237
Views
0
Helpful
4
Replies
CreatePlease to create content