Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPM

Hi,

Can anybody provide sample config for IP SLA. I have 6500,3750 and 5400 and 3660 cisco devices.Installing LMS3.1 -IPM.

Thanks and Regards

2 REPLIES
Cisco Employee

Re: IPM

If you're going to use IPM to configure IP SLA, all you need configured on your devices are SNMP read-only and read-write community strings. For example:

snmp-server community public RO

snmp-server community private RW

Of course, public and private are the typical examples, and you should use strings which are harder to guess. Once the devices are in DCR, then IPM can manage them. If they support IP SLA, then IPM will manage them as source routers, and allow you to configure collectors.

If you want to make any of them IP SLA target devices for use with UDP jitter operations, then you will need to configure the IP SLA responder as well. The actual syntax varies depending on the release of IOS. However, it will require one of the following commands:

ip sla responder

ip sla monitor responder

rtr responder

Only one will work on your device depending on the code version.

New Member

Re: IPM

Thanks clarke...

159
Views
0
Helpful
2
Replies