Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

is monitoring devices in both LMS and CUOM necssary

We are monitoring all network devices approximatly 1500 routers / switches with LMS.

We recently installed CUOM for UCOMM / VOIP we have 3 clusters and about 10k phones.

Is there any reason to monitor the access switches and LAN infrastructure in CUOM? Since they are alrady monitored in LMS I'm hoping to just monitor the call managers, voicegateways and phones in cuom.

we will have some 1040 probes and service monitor on the distribution switches which carries voice traffic.

does that make any difference?

I'd say its not necessary to monitor the switches in CUOM but-- the mgr wants a second opinion

thanks in advance

Bill

3 REPLIES
Silver

Re: is monitoring devices in both LMS and CUOM necssary

Cisco licenses a striped down version of smarts to do the real time monitoring.

I'm not fully convinced it is topology aware, but if it is, having the switches in it's database would be allowing it to do a root cause analysis and provide sensible output as to what is not working right.

Without the topology information it would not be able to do that.

Cheers,

Michel

New Member

Re: is monitoring devices in both LMS and CUOM necssary

thanks for the reply - When you say having the switches in the database, do you mean in the DCR for Operations Manager OR actually located in the OM database of monitored devices? (meaning it would use up a license, I believe)

Silver

Re: is monitoring devices in both LMS and CUOM necssary

I meant the DFM database(s) but for a device to be in there it has to be in the DCR of the Operations Manager, using up a license indeed.

Cheers,

Michel

402
Views
0
Helpful
3
Replies
CreatePlease to create content