10-01-2006 11:28 PM
i have a cisco 2811 router with a bri slot having 4 ports.i have complete the isdn ddr configuration but the call is not initiated when i connect it.help me in this regard
10-02-2006 02:36 AM
have you configured interesting traffic
static routes and so on
10-02-2006 03:52 AM
there are a few configuration pieces that you may still need such as floating static routes and defining interesting traffic to bring up the BRI, thresholds, etc.
please see the following link for more BRI DDR configuration info:
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080093c6d.shtml
also, please see the following for BRI with Backup Interface. (also uses DDR)
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a008009455d.shtml
10-09-2006 06:28 AM
you have to configure statics routes and interesting traffic with dialer-list command
10-09-2006 06:48 AM
hi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide