Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issue:Creating Ip Sla operation using snmp

Hi,

Who can explain why I can't set createAndGo or createAndWait in rttMonCtrlAdminStatus?

Maybe it is a security problem?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Issue:Creating Ip Sla operation using snmp

You must set all of these in the same packet. Trying to set them in individual requests will fail.

8 REPLIES
Cisco Employee

Re: Issue:Creating Ip Sla operation using snmp

Please provide exactly what you are trying to do including all objects you are setting and their values as well as the device and IOS version you are using. What error are you receiving?

New Member

Re: Issue:Creating Ip Sla operation using snmp

Device info:

Cisco IOS Software, C2600 Software (C2600-ENTBASEK9-M), Version 12.4(13), RELEAS

I am trying to set following objects:

----------------------------------------------

rttMonCtrlAdminStatus. -Integer 4 or 5 rttMonCtrlAdminRttType. -Integer 9

rttMonEchoAdminProtocol. -Integer 27

rttMonEchoAdminTargetAddress. -OctetString "05 00 00 02"

rttMonEchoAdminTargetPort. -Integer 8000

rttMonEchoAdminInterval. -Integer 20

rttMonEchoAdminNumPackets. -Integer 100

rttMonScheduleAdminRttStartTime. -TimeTicks 1

----------------------------------------------

I am reciving such SNMP error Ber Api overflow.

New Member

Re: Issue:Creating Ip Sla operation using snmp

Note:Using CLI to configure jitter operation work fine.

Please help me!

Cisco Employee

Re: Issue:Creating Ip Sla operation using snmp

Do this all in one request, and it will work for you:

rttMonCtrlAdminRttType. -Integer 9

rttMonEchoAdminProtocol. -Integer 27

rttMonEchoAdminTargetAddress. -OctetString "05 00 00 02"

rttMonEchoAdminTargetPort. -Integer 8000

rttMonEchoAdminInterval. -Integer 20

rttMonEchoAdminNumPackets. -Integer 100

rttMonCtrlAdminStatus. -Integer 4

rttMonScheduleAdminRttStartTime. -TimeTicks 1

The objects must be specified in that order.

New Member

Re: Issue:Creating Ip Sla operation using snmp

Unfortunately, I am reciving same error when try to

set rttMonCtrlAdminRttType. -Integer 9

If i understand rttMonCtrlAdminStatus(createAndGo or createAndWait) is used to create a new instance of a conceptual row and make it available for use.

Cisco Employee

Re: Issue:Creating Ip Sla operation using snmp

You must set all of these in the same packet. Trying to set them in individual requests will fail.

New Member

Re: Issue:Creating Ip Sla operation using snmp

Thanks a lot it work.

Can you provide me the info, which describe this approach?

if I understand all configuration IP SLA operation must be send in the same packet for all device?

Cisco Employee

Re: Issue:Creating Ip Sla operation using snmp

I don't have anything other than what I just told you regarding information on this. Yes, setting all objects in the same request is the way to do it.

290
Views
5
Helpful
8
Replies
CreatePlease login to create content